Search Site:
Tel: 0208 715 0040
Show cart

Spare Parts Catalogue

I-SUP Board Brands

Replacement Zip Runners

YKK Metal Runners for Coil zips. Most board bags use the YKK "coil zip" size No. 10, you can check the size of your zip by measuring across the closed zip plastic teeth, this is usually 10mm. indicating the zip size of No.10  
Click Here for more details 

YKK Metal Runners for Vislon zips. (the original toothed style of zip) Most board bags use the YKK "coil zip", However if your bag has the Vislon style of zip you will need the Vislon runner. You can check the size of your Vislon zip by measuring across the closed zip plastic teeth, this is usually 10mm. indicating the zip size of No.10 
Click Here for more details

Board repair materials and spare parts
White Gelcoat repair kits Click Here to Order
5 minute clear epoxy repair kit Click Here to Order
Epoxy Resins repair kits (40ml) inc. glass matting Click Here to Order
Epoxy Resins repair kits (300ml) no glass matting Click Here to Order
30 minute repair stick Click Here to Order
Neoprene clear adhesive Click Here to Order

Two position foot strap inserts. Dimensions for the Foot Strap Inserts are: L 40mm x W12mm x D 25mm with 4mm holes to a depth of 20mm

£2.50
M5 Foot Strap Screws:
Stainless screw & washer M5 x 38mm in length x 5mm total width
(requires a 3.8mm hole to take the solid shaft of the screw) (sold in pairs)
(Can be trimmed to any size)
£2.95
M6 Foot Strap Screws:
Stainless screw & washer M6 x 25mm in length (sold in pairs)
(requires a 4.5mm hole to take the solid shaft of the screw)
£2.95
M7 Foot Strap Screws:
Stainless screw & washer M7 x 32mm in length (sold in pairs)
(requires a 5.2mm hole to take the solid shaft of the screw)
£2.95

White 30mm Metal Leash Plug

White 30mm metal leash plug, simple to fit into any board.
  Click Here
to Order
White 40mm deep SUP centre handle
White 40mm centre handle, simple to fit into any hard shell board.
£4.95

Replacement 10mm Air Screw for F2, Starboard etc. 

We can fix your vent thread If you have or suspect you have stripped the air vent thread within the board, we can re-thread the board vent while you wait and give you a life time warranty on the job.

£4.95

All "O" rings are supplied singularly  (Minimum mail-order value £5.00) Price
Single Air Pressure "O" Rings 5mm (small) £1
Single Air Pressure "O" Rings 10mm (standard) £1
Single  Mast Extension "O" Rings (multi fit) £2
Replacement "O" Rings for All Air Pressure
Release Screws and Mast Extensions
Replacement US fin box 27cm - 25cm internal  (also suitable as a longer mast rail)
£24.95
Replacement Power box £24.95
Replacement Tuttle box (shallow) £24.95
Replacement Mast rail including air vent 20.5cm £24.95
Blue Chip Universal Soft EVA Deck Covering
click here for more details

Downhaul Comfort Pulley

Brass and stainless construction
Three rollers to match most extensions
Greatly reduce the effects of friction
£19.95
Click on the images for more deck plates and rigging spare parts   Click Here
to Order
Click on the images for loads more extension spare parts   Click Here
to Order
North Pin UJ Insert
18/80
Stainless Steel North Pin UJ insert.
  Click Here
to Order
M8 Hex Stud
18/80 UJ Insert M8 Hex Stud.
  Click Here
to Order

Replacement Sail Head cap, can accommodate mast tips up to 31mm Ø and up to 20mm webbing. £7.50

Replacement twin pin boom arm adjustment lock £7.95

                  Replacement Boom Covering   Click Here
to Order


                   Efficient 2 pack non-slip clear coating for your board.

  Click Here
to Order
Sail Battens
 We supply all of our sail battens 90cm and longer on our standard next day courier service (Royal mail will not handle sail battens of 90cm or longer as post)
   

Pultruded battens per metre (specify length in comments at check out) (including end caps)
£8.00

Profiled Glass per metre (specify length in comments at check out) (including end caps) £8.00

Rod battens:

  • Suitable for replacing tapered rod battens
  • Suitable for replacing luff-end tapered rods on 3/2 section battens.
  • Just order the length you need or the next size up and trim to fit.
  • 8.5mm OD with a taper to one end (can be supplied to order without taper)
   
If you require "none tapered" battens, just request this in the comments box at the checkout
Rod battens, suitable for most sails 80cm (Also suitable for replacing luff-end tapered rods on tube battens) £11
Rod battens, suitable for most sails 100cm (Also suitable for replacing luff-end tapered rods on tube battens) £12
Rod battens, suitable for most sails 120cm £13
Rod battens, suitable for most sails 140cm £14
Rod battens, suitable for most sails 160cm £15
Rod battens, suitable for most sails 180cm £16
Rod battens, suitable for most sails 200cm £17
Rod battens, suitable for most sails 220cm  -  This length is special order and will take about 10 days £18
Rod battens, suitable for most sails 240cm  -  This length is special order and will take about 10 days £19
   
Tube Rod battens, 3 sections; these are made to order with a tapered rod batten (luff end), 13.5mmØ centre tube section and a short non tapered rod leach section to accommodate the batten adjuster.

Tube Rod battens, 2 sections; these are made to order with a tapered rod batten (luff end) plus a 12mm. OD tube section out to the leach to accommodate a strapped end cap. Unless specified at the checkout, we will supply a 3 section style of Tube Rod batted.
Tube Rod batten front end replacements: Front tapered rod section; these can be replaced with our standard Rod Section battens, just order the next size up from, the length required and trim the un-tapered end to size. (You can also trim the tapered end to increase the stiffness if required.)
   
Tube Rod Batten "Made 2 Measure" Service: We can cut tube/rod battens to your specification for £10 per batten, this charge is on top of the cost of the batten (which will be charged at the next stock size up from the custom size ordered) and includes joining ferules but not the batten adjuster. In the height of the season it can take about 5 days to make up made 2 measure battens.
3 Section Tube Rod battens
£10
Tube Rod battens, very light and stiff suitable for most sails; lengths up to 140cm £20
Tube Rod battens, very light and stiff suitable for most sails; lengths up to 160cm £22
Tube Rod battens, very light and stiff suitable for most sails; lengths up to 180cm £24
Tube Rod battens, very light and stiff suitable for most sails; lengths up to 200cm £26
Tube Rod battens, very light and stiff suitable for most sails; lengths up to 220cm
(there is a £10 oversize delivery surcharge for this size batten)
£28
Tube Rod battens, very light and stiff suitable for most sails; lengths up to 240cm
(there is a £20 oversize delivery surcharge for this size batten)
£30
Tube Batten Material    
13.5mmØ - 11mm ID tube batten material 0.9 meter length (delivered by carrier) £15
13.5mmØ - 11mm ID tube batten material 1.8 meter length (delivered by carrier) £30
Batten Fittings    
Tube Rod Joining Ferrules £1
4mm Glass sail batten up to 100cm (specify length in comments at check out) £8
Batten End caps £0.75
Batten Adjusters
ITB (Internal Trim Batten) reconditioned adjusters complete with all working parts; most brands and types: Gun, Pryde, Arrows, Gaastra, Tushingham, Ezzy, North etc.   Please check the image and detail the exact model in the comments box at the checkout or better still, click here and send an image of the ITB you require
£5
Cams ; various inc. roller and ball cams Gun, Pryde, Arrows, Gaastra, Tushingham etc.
Please detail the exact model in the comments box at the checkout or better still,
click here and send an image of the cam you require
£19
Sail, Kite and Spinnaker repair materials
    Windsurfing DIY repair material
    Monofilm repair kits 100 x 1000mm
 
£5 Click Here
to Order
Windsurfing DIY repair material
Dacron heat-set sail repair tape; Small rips in the sail (up to about 5cm) can probably be repaired satisfactorily with our heat-set adhesive Dacron repair tape. We can supply this in most colours to give a suitable finish. 50mm width and supplied by the metre 
  Application instructions
£5 Click Here
to Order
Dinghies DIY repair material
Dacron heat-set sail repair tape; Small rips in the sail    (up to about 5cm) can probably be repaired satisfactorily with our heat-set adhesive Dacron repair tape. We can supply this in most colours to give a suitable finish. 50mm width and supplied by the metre  
  Application instructions
£5 Click Here
to Order
Kite DIY repair material
Light weight Kite heat-set repair tape; Small rips in the kite sail  (up to about 10cm) can probably be repaired satisfactorily with our Light weight Kite heat-set repair tape. We can supply this in most colours to give a suitable finish. 50mm width and supplied by the metre  
   Application instructions
£5 Click Here
to Order
Spinnaker DIY repair material
Light weight Spinnaker heat-set repair tape; Small rips in the kite sail  (up to about 10cm) can probably be repaired satisfactorily with our Light weight Spinnaker heat-set repair tape. We can supply this in most colours to give a suitable finish. 50mm width and supplied by the metre  
  Application instructions
£5 Click Here
to Order